The extra thin printed circuit means the thickness of printed circuit board is thinner than the normal PCB. For most of FR4 PCB, min thickness is 0.3mm or 0.4mm, whatever it is 1L or 2L. For 4L, it will be more about 0.6mm.
But sometimes, limited to space or margin, or needed by design purpose, people needs extra thin such as 0.25mm, 0.20mm, or even 0.15mm board. For providing customers with the most suitable products and the most satisfactory services, Best Technology also made the extra thin printed circuit.
For this 2L FR4 PCB, we are able to make it to 0.15mm±0.1mm. Then you can use it in SIM card, sensor card and so on. As shown, it can also be rotated 180 degrees.
Picture1: 0.15mm 2L Extra Thin PCB
Besides, we are able to provide the extra thin PCB with or without soldermask, and copper thickness for 1/2OZ, 1OZ. It depends on the needs of the customers.
Picture2: Extra thin 0.2mm
Since established in 2006, Best Technology is always dedicated to provide the most suitable products and the most satisfying service for customers, to be customers’ best partner of PCB and PCBA in China.
